Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

All ideas

Showing 1296

Annotate Rock and Undercut in XS

When you create earthwork, there is a way to create an additional quantities for rock excavation and unsuitable material. We are wanting to be able to run the earthwork EAV report to have those quantities in EAV format, and then be able to annotat...
over 2 years ago in Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Need Named Boundaries or Multi-Point Cross Sections that can turn for secondary alignments

Currently, when secondary alignments are used, the cross sections are always based perpendicular to the primary alignment. We need the ability for named boundaries (or some other means of creating multi-point cross sections) to understand when sec...
over 2 years ago in Drawing Production / OpenRail Designer / OpenSite Designer 4 Future consideration

Option to refresh/update/revise geometry point sequencing

When designing different types of sites/pads etc, it is very typical to provide set out points on our drawings. The issue is that designs can change requiring us to remove certain points which will leave a gap in the point sequencing. There needs ...
18 days ago in Geometry / OpenRoads Designer 0 Future consideration

Bring back "Depends On" in the Properties

It is my understanding that this was removed in the 2024 version due to general confusion, but I'd like it to be added back. If it is made toggleable, it can be turned off by default to avoid the aforementioned confusion, and this allows those tha...
about 1 month ago in Geometry / OpenRail Designer / OpenRoads Designer / User Interface 0 Future consideration

Labels Every 100' and Ability to Pick Start Point

I created the Civil Label for the 100’ elevation along a geometric element, but I want to be able to pick where the labeling starts and not at the start of the geometric element. I want to establish a target to start the 1st label at a prompted cl...
about 1 month ago in Annotation / OpenRail Designer / OpenRoads Designer 0 Future consideration

Remove all dupplicates of button...

4 properties, 2 zooms, all bunch of desactivated button in the superelevation editor (2 copy, 2 paste, 3 zoom, Make graphical edit...)
6 months ago in OpenRail Designer / OpenRoads Designer / User Interface 0 Future consideration

End Area Earthwork Corrections for Curvature

End Area Volumes are still a contractual requirement on projects. We need a tool to correct the earthwork calculations around curves like the GEOPAK “Centroid Adjustment” tool that did that correction and provided a summary of the centroid locatio...
over 1 year ago in Drawing Production / OpenRail Designer / OpenRoads Designer 0 Future consideration

Need ability of having different Spiral Types in OpenRoads Designer

Need to have an option of having different spiral curve types in OpenRoads Designer mainly cubic parabola which is similar in OpenRail Designer. This is also required to satisfy new expressway design specification as per table no 2.4 in clause no ...
about 1 year ago in Geometry / OpenRoads Designer 0 Future consideration

[Terrain] Flow arrows with slope percentages

Need ability to toggle slope percentage annotations above/below the flow arrows on terrains. This will help with design and analysis. An option could be added in the flow arrow properties, please refer to the attached snapshot.
about 1 year ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / Terrain 1 Future consideration

Split Cross Sections if Elements in Model Extend Outside of Default Width.

Currently our DOT requires that if ROW lines (or any element in the corridor) are outside the width of the default XS width, the user needs to create an extension or split the XS's to be able to show all design elements and ROW labels. Currently t...
over 2 years ago in Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration