Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

Applications

Showing 1030

Allow user to define width of superelevation section graphic.

Currently, the graphic representing the superelevation section is hard coded to use the radius of the smallest curve in the alignment. If the radius of the smallest curve is 50 meters or more, the section width is hard-coded to 50 meters. If t...
9 months ago in OpenRail Designer / OpenRoads Designer / Superelevation 0 Future consideration

Automatically calculate values when inputting into property fields

When inputting numbers into property fields, ORD can automatically calculate them for you. Example: Survey field team shoots the top of casting elevation of a manhole at 500ft, then shoots again for a bottom invert of the manhole but only leaves a...
9 months ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / User Interface 0 Future consideration

Create corridor without vertical

Having the ability to create a corridor without needing a vertical can be helpful when a project involves widening. With widening, I wouldn't need a profile along the CL, but instead it would be along the EOP. Point controls can be used to attach ...
over 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer 0 Future consideration

Ability to customized terrain check report with RMSE values and confidence percent in a excel out put.

This would be extremely helpful in final deliveries to clients reports, providing them with statistice they need.
over 1 year ago in OpenRail Designer / Terrain 0 Future consideration

Create corridor from reference feature

Our current standard workflow for roadway corridor modeling is to create a pavement corridor then a corridor for each end condition Rt and Lt. I have seen many others including some Bentley folks use this method. It would be big time saver to have...
about 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer 2 Future consideration

Need the ability to define sequence number other than at the end of the filename

We have a standard naming convention that uses sequence numbers which are in the middle of the filenames. This has been our standard for over twenty years. Additionally, we require each sheet to be in a separate file for multiple flexibility and a...
9 months ago in Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Allow entering a degree of curve (d 00^00'00") as the Radius of the Alignment Table Editor.

When creating curves, an ORD user is allowed to enter a degree of curve (d 00^00'00") as the Radius. Put the same functionality in the Alignment Table Editor.
9 months ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Update "Coordinate Grid" tool to allow more options

The "Coordinate Grid" tool needs to be updated to provide more options of the coordinate text placement allowing offsets & rotation etc. There should be, at a minimum, the same amount of control as we had with the InRoads tool "Place Coordinat...
over 1 year ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Ability for Corridor Horizontal Parametric Constraints to be applied with Reverse Cubic Curves

In our legacy software we could quickly and easily apply a reverse cubic curve tapers for our designs without having to create Geometry and have our lane edges follow that - noting that the Geometry is not actually the required reverse cubic curva...
about 2 years ago in OpenRoads Designer 0 Future consideration

Numerical display for applied cant

Recommended that a when using the cross-section tool to view the applied cant along the alignment, the tool displays the cant as numerical value on the cross-section. The number should be generated automatically and displayed next the chainage...
over 1 year ago in CANT / OpenRail Designer 0 Future consideration