Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

All ideas

Showing 1678

Camber on the beam, Beam need to be curved and follow the underside of the deck without gaps- Australia specific

The current beam hog modeling behavior is not as expected. While deck thickening can be applied, the supporting beams remain straight and do not conform to the underside profile of the deck. In reality, the beams should follow the curved shape of ...
4 months ago in OpenBridge Modeler 0 Future consideration

The fatigue stress range calculation doesn’t follow as per AASHTO Table 6.6.1.2.3-1, Section 7.2

LBS V22.00.02.19CS0035224 Service Case 1233802: [CS0035224] The fatigue stress range calculation doesn’t follow as per AASHTO Table 6.6.1.2.3-1, Section 7.2 Product Backlog Item 1233801: (VM):LBS:V22:The fatigue stress range calculation doesn’t fo...
4 months ago in OpenBridge Modeler 0

( OBM > Deck > Thickness variation) Deck variations remain normal to alignment.

I am attempting to model a 3 span concrete slab bridge with thickened haunches over the supports. I am using a typical deck template. My thickness variations are shown in the first attachment. The Bridge has a 10 degree skew angle at the supports....
4 months ago in OpenBridge Modeler 0 Already exists

Return the View & Edit for editing and nesting elements

Please add back the SignCAM View & Edit functionality available in the 10.02 version that is used frequently for sign making, breaking apart and nesting elements before cutting. This is useful for saving material. The 2024 version does not hav...
12 months ago in OpenRoads SignCAD 0 Future consideration

Create transitions between templates to eliminate gaps between them

A useful tool which shoud be added to the program is transition between different types of templates. It would be useful both in cases of tracks and corridors ( namely surfaces with different width ). Currently, if one implements several types of ...
over 1 year ago in OpenRail ConceptStation 0 Needs review

Import data from reports to Item Types

Currently, is possible to create and personalice reports (Analise)using Item Types data, however,there is no relation back. It would be very benifecial if data added or even changed into the reports could be imported back into the model and Item T...
almost 2 years ago in Item Types / OpenRail Designer / OpenRoads Designer / OpenSite Designer / Reports 0 Future consideration

Drainage Structure Analyzer

Please include a tool similar to the Drainage Structure Analyzer from Inroads Storm and Sanitary. This tool is very useful for quick sizing without having to set up a model, especially with culverts and channels.
over 1 year ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Label all the points in a superelevation section with Civil Labeler

Superelevation is a tabular note that goes on the general info sheet with the super elevation diagram, so we usually just fill out the info in that tabular note. Designers just blow up the tabular note to add lines and make it work per project. If...
about 2 years ago in Annotation / OpenRail Designer / OpenRoads Designer / Superelevation 0 Future consideration

Offset Alignment - Controlled by Station, Offset and Cross Slope.

An OFFSET ALIGNMENT / GEOMETRY CHAIN command would be a gamer changer for ORD. Most of our geometry including "edge of pavement", "curb" and "ditches" are controlled by station offset cross slope from a control line. Currently to create offset geo...
almost 3 years ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Cross Section Station Label Precision

We would like a way to set even stationing to one precision and odd stations to another. Even station, 0 decimals and odd station 2 decimals in the same run.
over 2 years ago in Drawing Production / OpenRail Designer / OpenRoads Designer 0 Future consideration