Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

All ideas

Showing 132

Modify the LLS part when placing a turnout.

Currently one could add an LLS part on a turnout. Unfortunately this is a standard value. Sometimes, when creating a horizontal geometry, it is necessary to ''shorten'' the LLS part (aka to place a fewer amount of long sleepers that a standard LLS...
3 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Create a tool that constructs transitions between different types of rail sections

Sometimes in track design, one must use different types of rails, say 60kg and 50kg rails. One could weld them and grind them together but this is a crude method. In Sweden they use what is called a transition rail, which in principle contain a sm...
3 months ago in Modeling / OpenRail Designer 0 Needs review

Fiber Mesh Cross Sectional Analysis

Con sider adding fiber-mesh tools for cross section analysis to RMBRIDGE. This allow the use of different materials in the cross section. This is important in seismic analysis for the definition of the Moment-Curvature properties. This feature is ...
8 months ago in Analytics / OpenBridge Designer 0 Needs review

Designing Geometry using multiple spiral type

Currently we can set up one spiral type for one DGN. If the geometry needs to be designed using different spiral type, we need the flexibility to allow the application of multiple spiral type in one DGN
3 months ago in Geometry / OpenRail Designer 0 Needs review

Measure rail interval similar to Pro Rail extension

In Bentley Rail Track, there was an extension called Pro Rail that allows users to measure the interval between rail dynamically. Right now, we are able to report that using Station-Offset report but we are not able to track it which makes it chal...
3 months ago in OpenRail Designer 0 Needs review

Exporting Field Book with Observational Data

I process survey data for the Maine Department of Transportation. We have been transitioning from InRoads to OpenRoads for about a year now and are currently using OpenRoads Designer 2023. Myself and others in the Department are seeing frequent co...
about 1 year ago in OpenRail Designer / OpenRoads ConceptStation / OpenSite Designer / Survey 1 Needs review

Develop and Annotate Partial Geometry

In my experience, it's common to tie a proposed vertical alignment into an existing vertical curve. This can be easily done with the geometry tools. However, the annotation is only drawn to where the proposed geometry terminates. While technically...
3 months ago in Annotation / Geometry 1 Needs review

Create transitions between templates to eliminate gaps between them

A useful tool which shoud be added to the program is transition between different types of templates. It would be useful both in cases of tracks and corridors ( namely surfaces with different width ). Currently, if one implements several types of ...
over 1 year ago in OpenRail ConceptStation 0 Needs review

Enhancement to the Coordinate System Tool: Include the chosen coordinates to future sheet views and models

To improve time management and work productivity, I thought modifying the Coordinate System tool to add a feature that will apply the County/Coordinate System to all future sheets and models created in the file. Currently, when we use the 'CreateF...
about 1 year ago in OpenRoads Designer 1 Needs review

Requesting Dogleg Cross Sections

Cross sections must be perpendicular to the flow lines at all locations. And they cannot intersect with each other. That is why it is common to see cross sections snap at different angles outside the main channel (we call this doglegging). The tri...
over 1 year ago in Drawing Production 1 Needs review