Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

All ideas

Showing 118

When exporting to the IFC, keep a different identification for each item.

When exporting the IFC, each element is identified by a default value. For example, all solids come out with an identification as smartsolid. This makes it very difficult to search for an element in the model.
3 months ago in Import/Export / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer 3 Needs review

Multiple linked speed schemes to each cant table

I would like to have the possibility to link multiple speed schemes/train categories to each cant table in a way that makes it possible to create a report that includes cant, cant deficiency, sudden changes etc, for all speed schemes in one place ...
6 months ago in CANT / OpenRail Designer 0 Needs review

Option to add support settlement to Leap Concrete & Leap Steel

Differential support settlement can create additional internal forces in beams. Right now there is no option to account for those forces.
about 2 months ago in OpenBridge Designer 0 Needs review

Skewed key stations

I had a situation where I wanted to model Interstate NB and SB as separate and cut them off of the median cl. I was unable to get the tie slopes to tie to existing ground when cutting cross sections. Adding "key stations" at a skew would resolve t...
about 2 months ago in Modeling 0 Needs review

DU tool to update node name by feature definition

The name of the nodes are defined at placement by the selected Feature Definition. It's common for it to be changed during the design process. For these cases, all altered nodes must be manually renamed. This usually is done through selection or u...
7 months ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Needs review

More types of bridges needed

The software is capable of quickly performing conceptual design, but currently supports very few bridge types, which cannot meet the needs for scheme presentation. Could you please add cable-stayed bridges, and suspension bridges? Also, provide se...
about 2 months ago in OpenRail ConceptStation / OpenRoads ConceptStation 0 Needs review

Break decks into sections

Usually, the bridge deck of a precast beam is an integral unit per span. In actual construction, the bridge deck may be constructed in sections for each beam. Is it possible to break the bridge deck into sections for each beam, and further divide ...
4 months ago in OpenBridge Modeler 0 Needs review

Modify the LLS part when placing a turnout.

Currently one could add an LLS part on a turnout. Unfortunately this is a standard value. Sometimes, when creating a horizontal geometry, it is necessary to ''shorten'' the LLS part (aka to place a fewer amount of long sleepers that a standard LLS...
about 2 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Create a tool that constructs transitions between different types of rail sections

Sometimes in track design, one must use different types of rails, say 60kg and 50kg rails. One could weld them and grind them together but this is a crude method. In Sweden they use what is called a transition rail, which in principle contain a sm...
about 2 months ago in Modeling / OpenRail Designer 0 Needs review

Character Limit on Naming

RM BRIDGE, increase the naming character limits for load cases and load sets to more than 16 characters.
4 months ago in Modeling / OpenBridge Designer 0 Needs review