Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

All ideas

Showing 1619

Civil view Settings (Drainage and utilities) in Personal Preference

Have the Civil preference for drainage and utilities as file setting rather than personal preference. There are times we had to change the settings depends on what we are designing. eg. we want to show connecting conduit if we do drainage, not whe...
7 months ago in Drainage and Utilities 0 Needs review

Ability to assign name and/or number to horizontal geometry PC/PT/PI/CC/etc

Or maybe auto-assigning sequential number with the ability to add a prefix based on Feature Definition? Some clients require labeling the horizontal geometry points with a name/number that coincides with tables/reports. This applies to roadway geo...
over 2 years ago in Annotation / Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Future consideration

In Dynamic Sections, add width and cross slope for top of components to pop up window when hovering on components.

In SS2 InRoads Roadway Modeler we used to be able to see component slopes and widths in a pop-up window when hovering on components. This allowed us to quickly test that new point controls (or parametric constraints) were working as intended. It's...
over 2 years ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Future consideration

Exported TIN surface must carry same edge method on importing.

Exported surface in TIN format not keeping the same edge method while importing it in new .dgn file. So, it is expected to get such functionality where the exported surface should carry the same edge method or while importing any surface it should...
over 1 year ago in OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRail Overhead Line Designer / OpenRoads Designer / OpenSite Designer / OpenTunnel Designer / Terrain 1 Future consideration

Ability to manage outer/inner pipe wall symbology separate from linear/profile symbology settings.

Need the ability to see wall symbology but not centerline. If the centerline symbology is set to construction class so are the inside/outside walls and they don't print. If the centerline is set to 255 the inside/outside walls do display in print ...
2 months ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer 0 Needs review

Need to dimension Surface templates.

Need to be able to dimension Surface templ ates in the dynamic cross section view during design as well as XS Drawing Models for plans productions. Could do it in InRoads.
about 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Improve drawing annotation management

Sometimes we apply more than one drawing annotation to the same model. It would be good to have a model manager view with all the applied annotations group so that we can disable, remove or add. That way we could select what we want to remove inst...
8 months ago in Annotation / Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Enhancement::Additional Tool for Design of Cross over connection between Tangent & Canted Tracks

I suggest improvements to Bentley OpenRail Designer for handling Cross over connections in the following scenarios: Cross over Between Adjacent Tangent Tracks: Enable a simple geometric connection between two parallel tracks without the use of Geo...
9 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Detailed Design Report

Currently, the detailed design report in RCPIER only shows shear/torsion calculations for the column. Suggest also including detailed moment, crack control and all other AASHTO checks in the detailed checks so reviewers know which equations were c...
about 1 month ago in OpenBridge Modeler / Reports 0 Future consideration

"Export to IFC" exports the active model, not the default one.

The "Export to IFC" tool only exports the default model, not the active one. This is a big problem with OR since in most cases, the default model is the 2D. So we have to have the 3D reference turned on for it to export our objects. We end up with...
about 1 month ago in Import/Export / OpenRail Designer / OpenRoads Designer 0 Future consideration