Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

Functional Areas

Showing 1291 of 1539

Be able to change Slope> Ratio format Rise: Run divisor (:)

When selecting that option on design file settings or other places like the fields on text favorites. User needs to control the symbology of the divisor between Rise and Run. it seems to be hardcoded to use (:). User needs to change it to other te...
about 2 years ago in Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Assign Superelevation to Approach Slab

The ability to Assign Superelevation to Approach Slabs would be good. If I use the Sync with Deck that does bank the approach slab but also extends the edge of the approach out to the fascia of the Bridge. Typically, our approach slab extends only...
over 1 year ago in OpenBridge Designer / OpenBridge Modeler / Superelevation 0 Future consideration

Add Trailing Zeros Setting to Point Station

Need the ability to hide ".00" decimal for stationing using the trailing zeros setting. For example, station 100+00.00 would label 100+00. This is available for point offset and I've attached a screenshot of the settings needed.
8 months ago in Annotation / OpenRoads Designer / OpenSite Designer 3 Future consideration

Terrain Analysis profile tool

A tool similar to the DTM Analysis profile tool in Geopak. A quick profile of a terrain tool. This would be helpful to analysis and edit survey terrains and complex terrain models.
over 1 year ago in Terrain 0 Future consideration

Ability to control the cl profile (in a template/corridor) by vector offset method from adjacent corridors on either side.

I would like to control the elevation of my centerline point (point in template) to be controlled by a "vector offset method" by selecting to points (corridor feature) in two corridors that running parallel.
9 months ago in Modeling / OpenRoads Designer 5 Already exists

Wants ability to put the x,y,z, of the centreline location of the crosssection in a text favorite and place this in the cross section.

Wants ability to put the x,y,z, of the centreline location of the crosssection in a text favorite and place this in the cross section. In addition the Raw data high and low coordinates of the namedboundary of a cross section are available. but whe...
over 1 year ago in Annotation / OpenRail Designer / OpenRoads Designer 0 Future consideration

Add option to center cross sections on sheet

Add option to place a single column of sections per sheet and to center all the cross sections on the sheet.
over 1 year ago in Drawing Production / OpenRail Designer / OpenRoads Designer 0 Future consideration

Incorrect arc radius for turnout outer curve switch.

For turnout annotation, we need to add turnout with LLS Extension from the library. I know that it is possible to add LLS radius value for a defined curved turnout in the library, but for a complex project where there are a lot of curved turnouts ...
9 months ago in OpenRail Designer / Turnouts/Crossings 0

No subtraction of sleepers from ballast in corridor report

Corridor report does not subtract the volume of sleepers we added to the model from the ballast. I propose to add in the next version of ORD the possibility to subtract in the ballast the added sleepers.
9 months ago in OpenRail Designer / Reports 0 Future consideration

No possibility to set the lower limit height of the profile

When creating profiles using ,,Named Boundary”, I cannot set the lower height limit of the profile. I propose to add in the next part of ORD setting the lower height limit if we want to make one drawing sheet from profile. This would help with the...
9 months ago in Drawing Production / OpenRail Designer 1 Already exists