Pipe standards vary their minimum and maximum pipe cover values based on the size of the pipes. There needs to be an ability to set this per conduit size so that when running a design you can consider these different cover depths. As of now, you w...

Whenever you have a Geometry and used shared line (e.g. Lots), There should be a tool to remove duplicate/overlapping lines. Its problematic if we use a special linestyle with gaps and when the two line on top of each other it will look like a sol...

Need the ability to create corridors in OBM

Openroads Horizontal Geometry has lines, arcs, and circle features. Add a rectangular civil geometry element. This would be used for site grading (building pad), instead of drawing 4 individual civil geometry lines and complexing together, a recta...

I would like Geometry Points to support using parametric cells.

It would be nice to be able to export a drainage network into 2D linework that can be edited for plan sheets. Currently, we don't use our modeled files directly in our plan sheets as we cannot adjust the conduit line styles and it takes longer to ...

What I envision, would be the ability to define Math within a Text Favorite. So, let us say that "[[" would define the start of math in a text favorite. A text favorite could be created in that the value displayed, is math from element properties....

My state agency commonly uses gutters with a 4% cross slope. The maximum superelevation rate is 7%. The gutter slope stays at 4% in this situation. Spread does not compute in this scenario because "A depressed gutter must have a Gutter Cross Slope...

LFD design code is used in superstructure rehabilitation projects for bridges that are originally designed with LFD. Please consider making it an option in LEAP Steel similar to LEAP concrete.

When creating parcels in Geometry Builder, I would like the option to have it automatically add COGO/Geometry Points at the PIs and on-alignment points as I place the elements.