Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

Applications

Showing 1495

No possibility to set the lower limit height of the profile

When creating profiles using ,,Named Boundary”, I cannot set the lower height limit of the profile. I propose to add in the next part of ORD setting the lower height limit if we want to make one drawing sheet from profile. This would help with the...
12 months ago in Drawing Production / OpenRail Designer 1 Already exists

Frame action or double curvature to be considered when superstructure is integral with substructure

When a superstructure is integral to substructure for Leap Concrete, both girders in the superstructure module and columns in the substructure module analysis/ design should incorporate frame action for any design load cases such as breaking force...
12 months ago in OpenBridge Designer 0 Future consideration

Option to set station limits while creating Curvature Diagram.

I want option to set a station limits while creating Curvature Diagram so that we can focus on a very specific area instead of the whole geometry.
almost 3 years ago in Geometry / OpenRail Designer 1 Future consideration

Template Library - List Points and Components without Feature Definitions

In the Active Template pane of the Template Library, we are able to see Point Feature Definitions and Component Feature Definitions that have been assigned. However, we are not able to easily see all Points or Components which have no Feature Defi...
almost 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Already exists

Adding Japanese Cubic Parabola

OpenRail Designer seems to have Japanese Sine spiral type added from the formula used in Power RailTrack. However, there seems to be nothing similar to Japanese Cubic Parabola, which is based on a different formula from Japanese Sine.
12 months ago in Geometry / OpenRoads Designer 0 Future consideration

The ability to set a corridor feature definition that automatically increases the template drop interval in sections with curvature and superelevation

As we transition to using the model as a legal document, we are refining the standards we have for template drops to ensure our model provides adequate information to be used directly in construction. Our standards will require a certain interval ...
about 1 year ago in OpenRoads Designer 1 Needs review

Provide Low Point/High Point Information in Profile Table Editor

Lost functionality that was available in Geopak. Helpful to meet specific locations when designing a profile, instead of storing the profile and reading the profile report, or hand calculation of the low and high points.
about 1 year ago in OpenRail Designer / OpenRoads Designer / User Interface 0 Future consideration

Please add functional to Design/model special structure like retaining wall

Please add functions to Design/model special structure like L shape retaining wall with/without fence on top, pile with/without cap and Beam supported retaining wall etc. Attribute for setting those structure would be wall height, thickness, found...
about 1 year ago in OpenRoads ConceptStation 0 Future consideration

Please add support for DWG files on import or Attach function

I am using OpenRoads ConceptStation 2024, Tried to load the basic 2D dwg file as reference for a road design work, but system not allowed, current turnaround is convert dwg to dgn which is not best bet. Pease add support for DWG files on "import" ...
about 1 year ago in Import/Export / OpenRoads ConceptStation 0 Future consideration

Support for station range as option along with distance in Profile Offset Transition tool

Currently The Profile Offset Transition tool allows Distance parameter to select Start and the End of the profile offset element. But this causes some issues with the station of the offset profile if there is a gap at the beginning of the original...
about 1 year ago in OpenRoads Designer 0 Future consideration