Reattach corridor was recently disabled for linear templates and the only way to edit such corridor is to create new one from the scratch.

Currently, OpenRoads Designer does not support a native method for designing an end condition that targets both the terrain model and a specific elevation simultaneously without relying on external geometry such as contour lines or point controls....

Users are asking for item types for Parametric cells. Primarily for quantities reports.We tag each element, but can we expose volumes for each element in a Parametric cell. The most important things are Volume, Surface Area, Length(Column, Pile, C...

Currently, if an OBM model is defined with a strut/web wall between pier columns, the strut will not transfer to LBS, and there is no way within the LBS substructure design module to add a strut/web wall. This is a hug problem because we have brid...

It is helpful to have corridor overlay components that follow the surface for the bottom option, and follow a set distance above the surface for the top option. This was achievable in PowerGeopak SS10 by inputting a negative number for the surface...

Enable the use of multiple template drops (different cross section templates) in the Linear Template tool.

It would be more efficient to be able to see the station limits of parametric constraints graphically on screen with a control line in plan view and be able to change these stations and values dynamically similar to point controls. The only option...

In GeoPak, the Active Chain Control tool was very useful for selecting a particular chain or alignment and having the location information (station, offset, etc.) be display in a dialogue box. The location information would live track with the loc...

On road construction plans we need to label/annotate change points. We need to label where changes (lane width, superelevation transitions, side slope transitions, component start and end points, etc. ) from the “default” condition happen. The sof...

Civil cells does not support turnout or crossing elements. Ability to include turnout and crossings in civil cells, will enable creating civil cells for siding and yard areas.