Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

All ideas

Showing 1625

contour labeling that is somewhat view dependent, this goes for Label Terrain Contour tool as well

contour labels that are upside down our difficult to read. It would be advantageous to have all labels orientated correctly on each sheet (regardless of the north direction).
over 2 years ago in OpenRoads Designer 0 Future consideration

Ability to customize Slopes between points symbology and ruled

When labeling site pavements slopes, the tool only allows for a pre-defined symbology (slope=X.XX% ->) and it`s a simple text.We use a different symbology, basically a arrow cell and a text between the two points.The abillity to customize the l...
about 2 years ago in Annotation / Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Dynamic Tables

For the geometry review; setting out or other OpenRoads/OpenRail tables, if we can place the table/report into DGN design model, once the geometry or model is updated, the values of the table placed in the design model is also updated dynamic. sim...
over 1 year ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / Reports 1 Future consideration

Parallel snap with Civil horizontal line

When creating centerline geometry you may need it to be parallel to outside boundaries like Right of Way. It would be convenient to be able to select that snap and use it like it works for MicroStation lines.
over 2 years ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

There is no way to easily measure an area within a cross section.

In ORD when you attempt to measure the graphics within a XS View it appears that you get the surface area of the entire cut or fill volume. As a user, I need the specific end area for the element. Presently you have to trace the element with a mea...
over 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Prestressed Concrete Girder Beam End Cuts & Clips

It would be great if we could control the vertical end cut orientation of the concrete girders: Normal (as is) and Vertical (plumb to the world). Also, we often have to clip the corners of girders when bridges are on heavy skew. Would be nice to b...
almost 2 years ago in OpenBridge Designer / OpenBridge Modeler 1 Planned

Create Template Geometry - Option to create 2D Elements from points located below top surface

Currently only template points located on top surface can produce 2d linear elements. This also only seems possible, when the components they belong to, are not ‘Excluded From Top/Bottom Mesh’ (option in Component properties dialog) and the ‘Creat...
over 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Add "Update From Source" to Fieldbooks

Similar to the "Update from Source" available for terrain models, it would be great to be able to right-click on a fieldbook that's being read from an external file and tell it to refresh based on edits made to the external file. Of course, there ...
over 2 years ago in Survey 0 Future consideration

Automatically adjust structure Hight to include pipe thickness

it would be more accurate to calculate the structure Height if when a pipe is connected to a structure that the bottom base slab was adjusted to be below the wall of the pipe. this would also make the 3D model look better.
over 1 year ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Planned

Add surface to multiple drainage profiles quickly & in batch

I would like to be able to select multiple pipe profiles in the drainage and utilities tab and right click to add a surface to all of them at once. This will save a considerable amount of time - instead of needing to open each profile model indivi...
about 2 years ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration