When designing different types of sites/pads etc, it is very typical to provide set out points on our drawings. The issue is that designs can change requiring us to remove certain points which will leave a gap in the point sequencing. There needs ...

To avoid mistakes from typing in a wrong Name of Alternate Surfaces (AltSurf) when building your Civil Template, it would be nice to have the ability to choose an existing Name of AltSurf from a dropdown-list. The dropdown-list would show existing...

Concrete diaphragms can only be placed at the abutments for the bridges with steel girders at the moment. There is no option the define concrete diaphragm at the piers for steel bridges. Users should be able to define concrete diaphragms at the pi...

For example, when using a Civil Label to label a drainage node with a Text Favorite pointing to the Feature Name, the placed label does not update when the Feature Name is changed.

A command where, once activated, would prompt the user to select the first point, then the second point, and then the user's cursor would snap to a location located exactly in between the two points. This could be done without drawing any unnecess...

Drainage nodes currently utilize an Elevation Reference and a Baseline Reference. It would be better to split the Baseline Reference into two separate references, 1) "Station Reference", and 2) "Offset Reference". In practice, this would allow a n...

We already have the ability to add multiple annotation groups to XS. Perhaps I want a group for my R/W Annotation, and then others for slopes, elevations, etc. I can do that. The issue arises when something needs to be updated. Let's say for examp...

Currently in ORD existing cant can only either be viewed graphically in the curvature diagram or from within the cant editor. Current workflows to annotate existing cant in profile require the projection of both left and right rails in the vertica...

Example would be for Pipe lengths. If a label is set to place the "designed" pipe length, but it needs to be changed to constructed pipe length. And that civil label has been used multiple times in multiple sheets. It would be great if when someon...

Please add the option to use Civil Labeler in sheet models. For some sheets, there is no readily-apparent need to create a drawing model (e.g. for schematic-type drawings with no dimensions), so we only create a sheet model. Unfortunately, this pr...