Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

All ideas

Showing 1539

Modify the LLS part when placing a turnout.

Currently one could add an LLS part on a turnout. Unfortunately this is a standard value. Sometimes, when creating a horizontal geometry, it is necessary to ''shorten'' the LLS part (aka to place a fewer amount of long sleepers that a standard LLS...
about 2 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Create a tool that constructs transitions between different types of rail sections

Sometimes in track design, one must use different types of rails, say 60kg and 50kg rails. One could weld them and grind them together but this is a crude method. In Sweden they use what is called a transition rail, which in principle contain a sm...
about 2 months ago in Modeling / OpenRail Designer 0 Needs review

Character Limit on Naming

RM BRIDGE, increase the naming character limits for load cases and load sets to more than 16 characters.
4 months ago in Modeling / OpenBridge Designer 0 Needs review

Add an option to place endpoint instead of start point in the "line/arc from element" tools

It is normally very difficult to know where to place the start point to get the next element where you want it, especially when there are transition curves involved. To place the endpoint of the element and let the start point move would be much e...
4 months ago in Geometry / OpenRail Designer / OpenRoads Designer 0 Future consideration

Add support for multiple piers/abutments on the same support line

This will be very useful for bridge widening projects. Also, consider that the support will have gaps and overlaps between supports.
10 months ago in OpenBridge Modeler 1 Future consideration

Adjust Sight Visibility Tool to local markets

Hi, We are struggling with sight visibiloty analysis, because currently available methods covers only some of regional standards, like for example Italian, Australian, French or AASHTO. Equation used for that strandards is probably hardcoded somew...
12 months ago in OpenRoads Designer / Terrain 1 Future consideration

Cross Section Annotation for existing and design terrain models

In the created cross sections for the existing and multiple design terrain (surface), we need to annotate the 1) height difference between the terrain model(s); Also, 2) need to annotate the offset (length) from the point to the cutting line. This...
over 2 years ago in Drawing Production 3 Future consideration

Separate 3D line and 3D object for pipes to different levels.

In Drainage & Utilities, the 3D line and the 3D object for a pipes(conduit/link) is placed on same level. It would be great to have them on different levels - also because it can be a demand from from clients in Denmark, that the line is place...
12 months ago in Drainage and Utilities 3 Already exists

Request for Additional Pavement Striping Options in ConceptStation

This is a request for more pavement striping options to be available for placement in ConceptStation. For example, yield line under Linear Marking tool.
about 1 year ago in OpenRoads ConceptStation 0 Future consideration

DU: add drop calculation to node invert depending on lowest conduit wall thickness

Some times, most common with concrete conduits, the node invert needs to have a drop in reference to the lowest pipe to acomodate its wall. This would later be filled to match.For construction and BIM purpose, this difference is important. Special...
over 2 years ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 3 Already exists