Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

All ideas

Showing 1224

Add Trailing Zeros Setting to Point Station

Need the ability to hide ".00" decimal for stationing using the trailing zeros setting. For example, station 100+00.00 would label 100+00. This is available for point offset and I've attached a screenshot of the settings needed.
8 months ago in Annotation / OpenRoads Designer / OpenSite Designer 3 Future consideration

Terrain Analysis profile tool

A tool similar to the DTM Analysis profile tool in Geopak. A quick profile of a terrain tool. This would be helpful to analysis and edit survey terrains and complex terrain models.
over 1 year ago in Terrain 0 Future consideration

Wants ability to put the x,y,z, of the centreline location of the crosssection in a text favorite and place this in the cross section.

Wants ability to put the x,y,z, of the centreline location of the crosssection in a text favorite and place this in the cross section. In addition the Raw data high and low coordinates of the namedboundary of a cross section are available. but whe...
over 1 year ago in Annotation / OpenRail Designer / OpenRoads Designer 0 Future consideration

Add option to center cross sections on sheet

Add option to place a single column of sections per sheet and to center all the cross sections on the sheet.
over 1 year ago in Drawing Production / OpenRail Designer / OpenRoads Designer 0 Future consideration

No subtraction of sleepers from ballast in corridor report

Corridor report does not subtract the volume of sleepers we added to the model from the ballast. I propose to add in the next version of ORD the possibility to subtract in the ballast the added sleepers.
9 months ago in OpenRail Designer / Reports 0 Future consideration

Frame action or double curvature to be considered when superstructure is integral with substructure

When a superstructure is integral to substructure for Leap Concrete, both girders in the superstructure module and columns in the substructure module analysis/ design should incorporate frame action for any design load cases such as breaking force...
9 months ago in OpenBridge Designer 0 Future consideration

Import profile from element

We should be able to import profiles from elements. Because the profile drawing gives us usually like dwg file format, or like cad file format. if we draw an empty profile same dwg's profile scale on the screen, we can import dwg profiles very eas...
about 2 years ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Make Civil AccuDraw automatically turn AccuDraw back on after closing.

I can't find and Ideas Forum for OpenRoads so I thought I would post here. I would like the ability to turn AccuDraw back on automatically after turning Civil AccuDraw off. Just like how when turning ON Civil AccuDraw, regular AccuDraw is automati...
about 4 years ago in  0 Future consideration

Best Match Field Code Option

In ORD 10.11 and beyond the Best Match Field Code Option is now a drop-down of the following: Match exact: Feature Must equal an Alpha Code, only exact matches. For example if there is a Feature Definition with Alpha Code set to AP (Asphalt Paveme...
9 months ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / Survey 0 Future consideration

Add extra Coloum which shows Delta Value in Geometry Report at PC, PT, No Curve PI, SC and CS

Alerts users to the existence of "kinks" in horizontal alignments. These "kinks" are where the back and ahead tangents at PCs and PTs of curves are not on the same bearing. There is a small tolerance built in to eliminate rounding errors.
about 2 years ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer / Reports 0 Future consideration