Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

Functional Areas

Showing 1345

Create Profile Named Boundary of non-active Verticals

We need a way to manually select the vertical alignment (profile element) when creating Profile named boundaries (instead of assuming we want to use the active vertical). In cases where we have divided roadways that follow a shared centerline but ...
4 months ago in Drawing Production / OpenRail Designer / OpenRoads Designer 0 Future consideration

Profile projection tools for crossfall relative to Target element

In legacy software, we had the option to either project crossfall from one element to another relative/normal to the reference element or relative/normal to the target element. We do not seem to have this functionality in ORD currently (although t...
almost 3 years ago in Geometry / OpenRail Designer / OpenRoads Designer 0 Future consideration

Ability to assign varying ledge heights on either side of an inverted tee cap.

useful feature when we have varying girder depth on either side of an inverted tee cap. currently ledge depth has to be same on either side , and the pgl is achieved by using thickened bearing seats
2 months ago in Geometry / OpenBridge Modeler 1 Already exists

Join Function in Table Editor Function similar to in Bentley Rail Track Horizontal Check Integrity Box

The join function is not available to join two or more straights with the same bearing that falls under one 'Complex Geometry'. This is especially problematic currently for us as there is currently no way to join two straights (see 'ORD Join Funct...
over 1 year ago in Geometry / OpenRail Designer 1 Future consideration

Ability to define non-uniform cross section named boundaries

The ability to define the location and width of cross section named boundaries that are not uniform along the length of the project. For example, regular sections might be 500 feet wide but some areas require wider sections for ramps, side roads, ...
almost 3 years ago in Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Future consideration

Connect a channel directly to an On Grade Inlet

It would be great if ORD had the capability to connect a channel directly to an On Grade Inlet to be able to calculate spread and bypass at the inlet. Currently the workaround is to connect the channel to a Generic Outfall at the edge of the inlet...
5 months ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer 0 Future consideration

Edit the Civil Properties in an existing Sheetseeds.dgnlib

Could we edit the values in the sheetseed.dgnlib rather than having to delete and start over. We can see the Civil properties and standards change and evolve could there be a way to let an admin make changes to the values. Example I want to change...
over 1 year ago in Drawing Production / OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRail Overhead Line Designer / OpenRoads Designer / OpenSite Designer / OpenTunnel Designer 0 Future consideration

Create 3D Automatically should inherit elevations from civil points if you draw a civil line and snap to the points

For detail grade areas it would be nice to place points in plan view and snap lines to those points. The lines would have annotation groups assigned to them to label the slope and distance between the points. Grades could then easily be tweaked by...
about 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Future consideration

Reflect template for template drop

It would be very helpful if we could reflect a template while assigning it to a template drop. Templates currently can only be placed in the direction they were created, from template origin "out". This requires a duplication of templates, as sepa...
over 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer 0 Future consideration

New turnouts, verify branch geometry

New turnouts, verify branch geometry like in (BRTRACK button there was a button
about 1 month ago in Geometry / OpenRail Designer 0 Needs review