Current Limitations Currently, creating overhead conductors between two "Overhead Nodes" (e.g., utility poles) results in a straight-line conduit. In reality, these lines always exhibit a natural sag due to gravity and tension forces. To model sag...
In 10.11 R1 (10.11.00.115), the profile projection icon under the OpenRoads Model tab changes when the projection’s source reference file is detached. Once you detach the reference the profile projection loses its civil rule, thus the icon changes...
When labels are generated from a horizontal or vertical alignment such as PI, PVI, PC, PVC, etc (perpendicular or parallel to the alignment based on the workspace settings), please make them draggable with the same interface as conventional MicroS...
Add traverse adjustment tool for OpenRoads like Inroads V8i used.
A traverse adjustment tool would be useful when needing to balance the error of closure using the option of methods (the compass rule, the transit rule, and the crandall method)
Please add the welding detailing tool (detweld.mdl) to OBM.
Please add the welding detailing tool (detweld.mdl) to OBM. This is a very necessary tool for bridge detailing. Having the welding symbols available in OBM is more relevant than in ORD. Thanks!
Target/Locate Buttons to Modify Corridor Object Stationing.
Add the Target/Locate button to the corridor objects dialog in order to change the stationing of point controls, parametric constraints etc. instead of ma manually entering station.
Drainage Annotation rotation based on sheet view rotation
Currently, the only rotation options for drainage annotation is constant. With alignments that are curving, our sheets must change rotation. It would save a lot of time spent manually adjusting rotation on each sheet.
Need to be able to dimension Surface templ
ates in the dynamic cross section view during design as well as XS Drawing Models for plans productions. Could do it in InRoads.
Add Something Similar to Auto Increment to Geometry Points.
Add Something Similar to Auto Increment to Geometry Points. The User should be able to have Geometry Points automatically add a number to the Feature Name.
0
Future consideration