Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

Functional Areas

Showing 1414

Incorrect arc radius for turnout outer curve switch.

For turnout annotation, we need to add turnout with LLS Extension from the library. I know that it is possible to add LLS radius value for a defined curved turnout in the library, but for a complex project where there are a lot of curved turnouts ...
about 1 year ago in OpenRail Designer / Turnouts/Crossings 0

No subtraction of sleepers from ballast in corridor report

Corridor report does not subtract the volume of sleepers we added to the model from the ballast. I propose to add in the next version of ORD the possibility to subtract in the ballast the added sleepers.
about 1 year ago in OpenRail Designer / Reports 0 Future consideration

No possibility to set the lower limit height of the profile

When creating profiles using ,,Named Boundary”, I cannot set the lower height limit of the profile. I propose to add in the next part of ORD setting the lower height limit if we want to make one drawing sheet from profile. This would help with the...
about 1 year ago in Drawing Production / OpenRail Designer 1 Already exists

Ability to customized terrain check report with RMSE values and confidence percent in a excel out put.

This would be extremely helpful in final deliveries to clients reports, providing them with statistice they need.
about 2 years ago in OpenRail Designer / Terrain 0 Future consideration

Adding Japanese Cubic Parabola

OpenRail Designer seems to have Japanese Sine spiral type added from the formula used in Power RailTrack. However, there seems to be nothing similar to Japanese Cubic Parabola, which is based on a different formula from Japanese Sine.
about 1 year ago in Geometry / OpenRoads Designer 0 Future consideration

Exporting reports to excel now prompted to save the file first, rather than it exporting directly into a new excel window.

Reporting tools are critical to our workflows to validate and document designs. Please consider reverting to exporting directly to Excel without having to save first - as this added step appears to be causing the issue, and only adds time to the w...
about 1 year ago in Reports 0

Update "Coordinate Grid" tool to allow more options

The "Coordinate Grid" tool needs to be updated to provide more options of the coordinate text placement allowing offsets & rotation etc. There should be, at a minimum, the same amount of control as we had with the InRoads tool "Place Coordinat...
about 2 years ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Provide Low Point/High Point Information in Profile Table Editor

Lost functionality that was available in Geopak. Helpful to meet specific locations when designing a profile, instead of storing the profile and reading the profile report, or hand calculation of the low and high points.
about 1 year ago in OpenRail Designer / OpenRoads Designer / User Interface 0 Future consideration

Allow member groups to start and stop at the same support line in LBS

We are modeling a complex bridge in LBS and the bridge is flared. The flare has required the addition of shorter beams that are not full length to keep the beam spacing on the flared end reasonable. Currently LBS does not allow more than one beam ...
about 2 years ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Flextable Export to Different Custom Excel Styles

Currently, Flextable can only export to csv with all colums. To make as proper report, user need to manually copy/paste the data. If the Flextable or software can export those nodes, conduits and hydrailuc properties, computation results to select...
about 2 years ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Already exists