When using the SignCAD to DGN utility, the sign panel outline is obscured when the signs contain a single white border with no indentation and the fill setting enabled. To work around this, our sign designers must add an outline/no-fill shape to t...

The geometry tools should allow for spaces between degrees minutes and seconds (N78 34 22E). This format is supported in the Geometry Builder but not the other geometry tools and the inconsistence is frustrating. Currently you have to enter either...

We are seeking the ability to specify a horizontal offset from a reference when placing and modifying geometric points. Currently, options for vertical offset (delta elevation from reference) and rotation offset (from reference) are available for ...

Open up a dgn with a terrain and set the feature definition to only display the boundary. Turn on triangles Edit terrain with Swap Line command Once you use the command the triangles disappear and reverts back to the initial feature definition. It...

We need a better way to control activation of the Persist Snaps functionality. Currently the Persist Snaps is always turned on by default when ORD is launched and also when switching to a different dgn. Persist Snaps is a very important functional...

Or maybe auto-assigning sequential number with the ability to add a prefix based on Feature Definition? Some clients require labeling the horizontal geometry points with a name/number that coincides with tables/reports. This applies to roadway geo...

We need that when writing down the singular points of a railway deviation (P0, P1, P2 and P3), they are joined by straight lines P1 with P2 and P0 with P3. See attached image. In fact, the V8i version did represent the detour scheme. Thank you!

It would be super helpful if I didn't have to search two different property menus for where to change specific properties. If the general properties menu and the ORD DU properties menu could be more centralized into one properties menu, this would...

In 10.11 R1, the Best Match Field Code survey setting option changed from a True/False option only to a more extensive dropdown list. However, when older survey files are upgraded, there is no way to control which best match option is to be used. ...

User request the ability to only create the drawing model and not the sheet model when running the Create Profile Drawing tool. SImilar to how the Cross Section one works. You have a toggle on the Create Cross Section dialog.