Allow user to pre-set default Unit Cost in Component Quantities for the corridor

LEAP Concrete defaults PCI Bridge Design Manual Table 8.7.1-1 for the deflection multipliers. However, in the same section, it is indicated that the composite multipliers given in the table are not properly account for the significant effects of a...

The "Coordinate Grid" tool needs to be updated to provide more options of the coordinate text placement allowing offsets & rotation etc. There should be, at a minimum, the same amount of control as we had with the InRoads tool "Place Coordinat...

We are modeling a complex bridge in LBS and the bridge is flared. The flare has required the addition of shorter beams that are not full length to keep the beam spacing on the flared end reasonable. Currently LBS does not allow more than one beam ...

It will be very helpful if OBM can project the deck centerline along the length of the bridge.

When working with plan elements or profile elements, I often find myself needing to find the Start Station and End Station of a line element or a profile element. A text favorite would be useful for placing text for this information as annotation,...

Is there a tool in ORD that can change the Design File Settings>Working Unite>Resolution and scale the model so that the model remains at the correct scale after the resolution change. Is there such a tool? If not, that is my design enhancem...

This is more than useful; this is absolutely required. When laying out Drainage Networks, pipes need to be trimmed at the inside edge of the structures, and the "True" pipe lengths (horizontal & vertical) need to be provided in the properties....

Currently, Flextable can only export to csv with all colums. To make as proper report, user need to manually copy/paste the data. If the Flextable or software can export those nodes, conduits and hydrailuc properties, computation results to select...

OpenRoads/OpenSite can only apply Feature Definition to Meshes, not solids. This would make it possible for advanced modeling with solids elements for BIM use. Feature Definition play a huge role when using the Export to IFC tool. If the solid has...