OpenRoads Designer

Showing 844

Display Civil Accudraw Controls on Geometry created using Offset Tools

When geometry is created using the Horizontal Offset Tools, if the geometry is controlled using Civil Accudraw snaps this is not reflected in the Properties Tab for start and end points. This makes adjusting the Civil Accudraw snaps difficult, suc...

8 months ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / User Interface 0 Future consideration

4 VOTE

Create a tool to clip alignments.

Create a tool to clip an alignment at any location along the alignment that does not affect or change the stationing or the station equations even if you are clipping the beginning of the alignment.

over 1 year ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

3 VOTE

Superelevation Rounding

Can there be added functionality to force rounding up rather than just being a standard rounding of what is set in the superelevation file editor? As it sits currently, if your rounding is set to 1, if a curve meets a value between 0 and .5 the su...

12 months ago in OpenRoads Designer / Superelevation 0 Future consideration

3 VOTE

Curve Set Intersection Point

Need a property for the intersection point of a Curve Set. e.g. Plan Annotation.Curve Set IP

12 months ago in Annotation / Geometry / OpenRail Designer / OpenRoads Designer 0 Future consideration

5 VOTE

Create skewed cross section via station and skew angle

Tools to add Skew cross section using station and angle like inroad SS10

over 1 year ago in Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

2 VOTE

Clipping reference

It will be helpful to see where the clipping is coming from. Example if reference file then would be helpful to know what reference file

8 months ago in OpenRail Designer / OpenRoads Designer / User Interface 0 Future consideration

4 VOTE

ADD ANOTHER BUTTON TO TURN ALL DECORATIONS OFF AT ONE TIME

over 1 year ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / Survey 0 Future consideration

4 VOTE

Add Point Projection Interval Option to "Create 3D By Slope To Target" Tool

Currently when using the "Create 3D By Slope To Target" Tool, ORD seems to only project a point at every vertex of a 3D line string. This is fine when using the Geometry Tools to create 3D line strings since it creates a vertex point in 3D based o...

over 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

3 VOTE

Provide a property for Corridors that shows the associated ITL

Corridors may use a variety of template drops that come from a non-default ITL (i.e. the one defined by the configuration variable CIVIL_ROADWAY_TEMPLATE_LIBRARY). A property of the corridor could be shown that identifies any of the ITLs associate...

about 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

5 VOTE

Template Switches and Triggers Built Into Corridor Rather Than Templates

Using display rules can be very difficult when you have nearly identical components on top of one another. We've all tried to eliminate this difficulty by using a ton of different templates, but that can be even worse when conditions keep changing...

over 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

OpenTunnel Ideas Portal

Please enter your email address

FILTER BY CATEGORY