Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

Applications

Showing 1146

Reverse direction of an existing complex element

A tool to reverse the direction of an existing complex element. There is a workaround by complexing the complex element but not an ideal solution.
over 1 year ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 3 Already exists

Profile Symbology Setting

Currently OpenRail does not have the ability to assign profile symboligies for Turnouts with the Turnout Feature Definition.
about 2 years ago in Geometry / OpenRail Designer / Turnouts/Crossings 0 Future consideration

Show Projected 3D Cuts when using the Project Run Tool

If we project the profile runs to centerline, we lose the ability to show the utility crossings generated by the 3D cut at the pipe centerline. We can add a 3D cut at the road centerline, but often the crossing utilities are not in the same locati...
about 2 years ago in Drainage and Utilities / OpenRoads Designer 0 Future consideration

Add all feature definition types to cross section annotation groups.

Currently, annotation groups are limited to certain feature definition categories. This limits our ability to automatically annotate point features such as signs or geotech borings or drainage/utility nodes. It would be desirable to extract data f...
over 1 year ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

RM Bridge update to use the correct AASHTO reduction factor for reinforced/prestressed concrete based on tensile strain in reinforcing at ultimate limit state.

The current RM bridge ultimate capacity calculations allow for material reduction factors only, which are not used by AASHTO for reinforced and prestressed concrete. AASHTO concrete reduction factors for flexure and P-M capacities are based on the...
6 months ago in OpenBridge Designer 0 Needs review

Civil Labeler - Elevations along Geometry with a given station range

It would be nice to be able to limit the elevation callouts (and other callout types) within a station range if possible. I.E > when labeling EOP/curb through an intersection, using the Elevation - Along geometry labels the entire element and t...
6 months ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Dynamic Settings should use Accudraw like interface rather than HS, DL, XY etc keyins

Accudraw intelligently interprets direction from the last input point. There would be no need to enter + or - on slopes as you move the cursor and lock in direction/distances. The keins would not be necessary if the template editor functioned simi...
about 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Coupling between horizontal and vertical regrerssion lines

A very problematic area is the coupling between horizontal and vertical regression analysis. Generally speaking, one must create a horizontal regression line first, create regressed elements, couple them together in a complex geometry and then pro...
over 1 year ago in OpenRail Designer / Regression Analysis 0 Future consideration

Add ability to Target Alias and clip a Conical Slope

The conical slope feature is very useful for model detailing. We use these often at bridge abutments. It would be helpful if we could target alias these features and also clip them.
about 2 years ago in Modeling / OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer 0 Future consideration

Superelevation Rounding

Can there be added functionality to force rounding up rather than just being a standard rounding of what is set in the superelevation file editor? As it sits currently, if your rounding is set to 1, if a curve meets a value between 0 and .5 the su...
9 months ago in OpenRoads Designer / Superelevation 0 Future consideration