Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

Applications

Showing 1478

Place one bearing at pier location for continuous span concrete girder bridge design

Ability to place only one bearing at pier location for continuous span concrete girder bridge design, two girders shearing one bearing at pier location.
over 2 years ago in OpenBridge Designer / OpenBridge Modeler 0 Future consideration

Modeling horizontal bracing for steel girder bridge

I believe OpenBridge modeler missing function to place horizontal bracing between girders (angle or CHS member) CHS preferable.
over 2 years ago in OpenBridge Designer / OpenBridge Modeler 0 Planned

Incorrect arc radius for turnout outer curve switch.

For turnout annotation, we need to add turnout with LLS Extension from the library. I know that it is possible to add LLS radius value for a defined curved turnout in the library, but for a complex project where there are a lot of curved turnouts ...
11 months ago in OpenRail Designer / Turnouts/Crossings 0

No subtraction of sleepers from ballast in corridor report

Corridor report does not subtract the volume of sleepers we added to the model from the ballast. I propose to add in the next version of ORD the possibility to subtract in the ballast the added sleepers.
11 months ago in OpenRail Designer / Reports 0 Future consideration

No possibility to set the lower limit height of the profile

When creating profiles using ,,Named Boundary”, I cannot set the lower height limit of the profile. I propose to add in the next part of ORD setting the lower height limit if we want to make one drawing sheet from profile. This would help with the...
11 months ago in Drawing Production / OpenRail Designer 1 Already exists

Frame action or double curvature to be considered when superstructure is integral with substructure

When a superstructure is integral to substructure for Leap Concrete, both girders in the superstructure module and columns in the substructure module analysis/ design should incorporate frame action for any design load cases such as breaking force...
11 months ago in OpenBridge Designer 0 Future consideration

Text Favorite: add Dynamic N,E,S,W preffix for MH labels

Add ability to have dynamic direction- N,E,S,W preffix in the label for MH labels Text Favorites. In Auto CAD the option is called "pipe direction". Following is the example of output required. (S) INV 99.8m (N) INV 99.7M
over 2 years ago in Annotation / OpenRail Designer / OpenRoads Designer 0 Future consideration

Add Elevation Mode "3D Element" as an option when placing points

We need to have the ability to place points by snapping to 3D elements (ORD Geometry & Regular Microstation Linework) This is how we give set out points to contractors for grading work. The only way to do this currently, is to choose Elevation...
almost 2 years ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Create corridor from reference feature

Our current standard workflow for roadway corridor modeling is to create a pavement corridor then a corridor for each end condition Rt and Lt. I have seen many others including some Bentley folks use this method. It would be big time saver to have...
over 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer 2 Future consideration

Support for LEAP

I would like to see an upgrade and continued support for LEAP Bridge Concrete and LEAP Bridge Steel. Most recent updates I have seen are from 2020 and with the ever increasing demand for Model Based Design it will be imperative to upgrade and prov...
almost 2 years ago in OpenBridge Designer 0 Already exists