Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

Applications

Showing 1185

Ability for Corridor Horizontal Parametric Constraints to be applied with Reverse Cubic Curves

In our legacy software we could quickly and easily apply a reverse cubic curve tapers for our designs without having to create Geometry and have our lane edges follow that - noting that the Geometry is not actually the required reverse cubic curva...
over 2 years ago in OpenRoads Designer 0 Future consideration

Separate geometric ratios summary from stress ratio summary

OpenBridge LEAP Steel Summaries include geometric ratios (like 6.10.7.3-1) together with stress ratios. This is not helpful, as that ratios is not a real demand/capacity ratio, therefore when that geometric value of "performance ratio" is high, it...
11 months ago in OpenBridge Designer / Reports 0 Future consideration

Dimension Element Tool: Dimensioning the arc length along with arc shape leader

The user needs a length dimension along with a leader shape that matches the measured arc. In the attached image, the white arc represents the length dimension along with the leader, which has the same shape as the measured arc (orange arc).
11 months ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Add Application Version number in Pref Folder

Please add the correct version number to applications user preference folder. Currently when you browse to Openroads user preference folder you get folders called 10.0.0 and 10.0.0_1. These folders need to contain the version number of Openroads s...
almost 2 years ago in OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRail Overhead Line Designer / OpenRoads Designer / OpenSite Designer / OpenTunnel Designer 0 Future consideration

Creating Generic Curb Offsets

I would like to create a generic curb for airborne lidar extraction with a 0.5 ft vertical offset from the gutter to the top of curb and then a 0.5 ft horizontal offset from the top of curb to the back of curb. I would want to collect the gutter a...
over 2 years ago in OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer / OpenSite Designer / Survey 0 Future consideration

Add Support for 3D Cut on Closed Alignments

Currently, The 3D cut does not work on the closed alignment's profile model. This is required specially in the case of Roundabouts. We can not create a 3D cut on the Roundabout profiles.
11 months ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Geometry Builder Interior Angles

We often get plats that have interior angles and distance for the parcels, tracts, etc. It would be nice if this option was in geometry builder.
almost 2 years ago in Geometry / OpenRoads Designer 0 Future consideration

Option to set station limits while creating Curvature Diagram.

I want option to set a station limits while creating Curvature Diagram so that we can focus on a very specific area instead of the whole geometry.
almost 3 years ago in Geometry / OpenRail Designer 1 Future consideration

Vertical curves/kvalues to report direction as positive/negative

Handing of vertical curves in reports/table editor is always positive in the reports. Geometry exports are used by Construction Teams, as part of the Approved for Construction design pack. Horizontal curves have a handing convention - +ve = RH cur...
12 months ago in OpenRail Designer / Reports 1 Future consideration

Add a warning prompt before deleting a line if it has elements drawn in the profile view.

This warning would be useful to avoid loosing work done in profile views.
12 months ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer / User Interface 0 Future consideration