Need Support? Let’s guide you to the right answer or agent.

OpenTunnel Ideas Portal

ADD A NEW IDEA

Turnouts/Crossings

Showing 12

Enhancement::Additional Tool for Design of Cross over connection between Tangent & Canted Tracks

I suggest improvements to Bentley OpenRail Designer for handling Cross over connections in the following scenarios: Cross over Between Adjacent Tangent Tracks: Enable a simple geometric connection between two parallel tracks without the use of Geo...
3 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Include info about side/hand of turnout from the tip of the turnout (Point 1) looking towards the toe (point 2)

Especially in reports but also in models we need to add information about turnout type including a letter showing towards which side looking from point 1 towards point 2, the branch is oriented. As it is now turnouts with Leading orientation will ...
about 1 month ago in Turnouts/Crossings 0 Needs review

Re-associate turnout to an alignment

When you create a new alignment, break a alignment and lose the turnouts or import a geometry it would be good to be able to re-associate or change the alignment to which a turnout are associated/connected to.For instance when I´m working with a c...
almost 2 years ago in OpenRail Designer / Turnouts/Crossings 0 Planned

Turnout profile elevation in reports

We need the ability to get the profile elevation from the turnout points to the turnout report.
5 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Profile Symbology Setting

Currently OpenRail does not have the ability to assign profile symboligies for Turnouts with the Turnout Feature Definition.
over 2 years ago in Geometry / OpenRail Designer / Turnouts/Crossings 0 Future consideration

Turnout points for tounge position

In railway engineering, there is a growing demand for positioning of the tongue in turnouts. The proposal is to introduce a new point in the Feature Definition of turnouts, making it possible to specify the distance from point .1 to the Tongue. Su...
4 months ago in OpenRail Designer / Turnouts/Crossings 0 Future consideration

Have both turnouts as ''free'' when calculating a crossover

When calculating a crossover geometry (2 turnouts+geometry in between) it could be beneficial if both turnouts (beginning and end) could be set as free. This would be beneficial in cases when two tracks are not totall parallel and the only option ...
almost 2 years ago in OpenRail Designer / Turnouts/Crossings 0 Future consideration

Include NR60 Mk2 turnout definition in OpenRail

NR60 Mk2 turnouts to be included by default in the standard OpenRail definitions.
about 2 years ago in Turnouts/Crossings 1 Future consideration

Incorrect arc radius for turnout outer curve switch.

For turnout annotation, we need to add turnout with LLS Extension from the library. I know that it is possible to add LLS radius value for a defined curved turnout in the library, but for a complex project where there are a lot of curved turnouts ...
4 months ago in OpenRail Designer / Turnouts/Crossings 0

Equilateral turnouts as a separate element with its own geometry for both main and deviating track

Currently, in order to create en equilateral turnout, one needs to recreate one of the branches (with exact geometry) and then add the branch part. This process has a lot of inconsistencies and sometimes results in unexpected geometries ( transiti...
almost 2 years ago in OpenRail Designer / Turnouts/Crossings 0 Future consideration